-Universal Testing Machine, Impact Testing Machine-

Blog

» Blog

300J 500J V Notch Charpy Impact Testing Machine

November 24, 2021

300J 500J V Notch Charpy Impact Testing Machine

300J 500J Charpy V Notch Impact Testing Machine is used to measure the impact resistance of metal materials under dynamic load, so as to judge the material quality under dynamic load.

The machine is a semi-automatic control testing machine with simple operation and high efficiency. It can be controlled by swing, impact and pendulum electrical appliances, and can make preparations for the next test by using the residual energy of the impulse test sample.

 

Technical features:

 

1. The main engine of the test machine is a single-supported column structure, a cantilever type pendant pendulum mode, and a pendulum hammer type U;

2. The impact knife is installed and fixed with screw, which is easy to replace;

3. Simple beam support for the sample;

4. The host is equipped with safety protection pin and safety protection net;

5. The test machine is semi-automatic control, and the hoist swing, hang pendulum, impact and put pendulum are all electrical control, and can make good preparation for the next test by using the residual energy of the impulse test sample.

 

Technical indicators:

 

Impact energy 300J (sledge) 150 (sledge)
Impact velocity 5.2m/s
pendulum Yang Angle

150 °

Sample support span 40
Round Angle of clamp mouth of support R1.0~1.5mm
Impact blade circular Angle R2.0~2.5mm  R8mm
Distance from center of pendulum to impact point 750mm
Standard sample size 10 x 10(7.5 or 5) x 55mm
Pendulum moment M=160.7695N.m  80.3848N.m
External dimension about 2,100×650 x1900
he accuracy of Angle 0.1 °
Weight about 500Kg

Maybe you like also