prezzo dell'indice di flusso di fusione
Barrel parameters | Inner hole 9.550±0.005mm |
Pistons parameters | Piston head: 9.474±0.005mm |
Outlet length | 8.000±0,025 mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, con quattro paia di controllo significativo dell'impostazione della temperatura, I parametri PID possono essere impostati automaticamente, precisione fino a ± 0.1 degree centigrade |
campo di temperatura | Room Temperature~450degree centigrade |
variazioni di temperatura | ±0.2 ℃ |
Temperature uniformity | ± 1 ℃ |
Risoluzione del display della temperatura | 0.1℃ |
risoluzione display | 0.1℃ |
Maximum comsuption | < 600W |
Time display resolution | 0.1S |
Weight parameters are as follows: | |
Weight accuracy | ± 0,5% |
Configurazione di base
|
A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 me. |
Material be installed | 1 me. |
Material sample temperature recovery time | 4 me. |
When binder set | 1me |
Output mode |
Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
carico di prova | Eight sets of weights |
Energia | AC220V±10% 50/60HZ |