melt flow indexer calibration

Plastic And Rubber Melt Flow Index Tester, Melt Flow Indexer Test Machine

This machinecan be used for ABS, polystyren, polyethylen, polypropylen, polyamid, vláknitá pryskyřice, akrylát, POM, fluor plastové, polykarbonát a další plastové materiály, rychlost toku taveniny (MFR) nebo objemový průtok taveniny (MVR) být odhodlán.

charakteristika:

1. Fast heating speed, very small overshoot.

2. High precision of constant temperature.

3. Plastic Rubber melt flow index MFI testing machine Can fast recover to constant temperature condition after padding.

4. Plastic Rubber melt flow index MFI testing machine Can use manual and automatic material trimming test method.

5. LCD display, equipment with built-in micro printer, test result can be printed automatically.Specifikace

velikost stroje(WHD)	250510350mm
Napájení	AC220V±10% 50Hz
Barrel parameters	Inner hole 9.55±0.025mm
Pistons parameters	Piston head: 9.475±0,015 mm
Piston length	H=6.35±0.1mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature rangeradius	400degree centigrade
Temperature accuracyblade to jawand dust collector	±0.2 degree centigrade
Rozlišení displeje	0.1degree centigrade
Maximum comsuption	< 600W
Temperature recovery time	less than 4 min.
Weight parameters
Přesnost hmotnosti	± 0,5%
Základní konfigurace	0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 mě.
Material be installed	1 mě
Material sample temperature recovery time	4 mě.
When binder set	1mě