индекс текучести расплава astm d 1238
ISO 1133 ASTM D 1238 Melt Flow Indexer MFR MVR Test For PP and PE
SO 1133 ASTM D 1238 Melt Flow Indexer MFR MVR Test For PP and PE
Discription:
Это для высокоточного прибора для измерения расхода расплава., используется для тестирования всех видов пластика, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), полистирол (PS), полипропилен (PP), ABS смолы, polyformaldehyde (ПОМ), поликарбонат (ПК) resin with lower melting temperature, such as plastic test, widely used in plastic production, изделия из пластмассы, petrochemical industry and related colleges and universities.
ISO 1133 ASTM D 1238 Melt Flow Indexer MFR MVR Test For PP and PE
стандарт:
ГБ/Т3682-2018, ИСО1133-2011, ASTM D1238-13
Product Character:
Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
Ø 2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 часов, the displacement sensor resolution is 0.001 мм.
Temperature and temperature protection device
Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
Ø 5.Can be set up in 240 секунд (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, и т.д.
Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
Ø 7.High precision touch screen controller, 7 дюймовый сенсорный экран, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, условия испытаний (температура, weight weight, blanking intervals), test results data.
Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease
Test Methods:MFR +MVR Methods
Режим отображения:English color touch screen display
ISO 1133 ASTM D 1238 Melt Flow Indexer MFR MVR Test For PP and PE
Спецификация
Модель | LR-A001-C |
Параметры ствола | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | Головка поршня: 9.474±0.005mm |
Piston rod diameter | 8.94мм |
Mold length | 8.000±0.025mm |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000±0.025mm |
Half die nominal inner diameter | 1.050±0.005mm |
Температурный параметр | С интеллектуальным прибором контроля температуры, с четырьмя парами значительного контроля температуры, Параметры PID могут быть установлены автоматически, точность до ± 0.1 градус по Цельсию |
Диапазон температур | Room Temperature~500degree centigrade |
Температура флуктуация | ±0.2 ℃ |
Temperature uniformity | ± 1 ℃ |
Temperature display resolution | 0.1℃ |
Разрешение экрана | 0.1℃ |
Максимальный расход | < 600W |
Time display resolution | 0.1s |
Weight parameters are as follows: | |
Точность веса | ± 0,5% |
Базовая конфигурация
|
A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Обнаружение положения | |
Расстояние петли сверху и снизу | 30мм |
Точность управления | ± 0,1 мм |
Управление тестовым потоком | |
Время резки материала | 0~10 раз |
Интервал резки материала | 0~ 999 с(set reference Table 2) |
Поток управления достигает заданной температуры без нестабильности | |
Время температуры ствола | 15 мне. |
Материал быть установлен | 1 мне. |
Время восстановления температуры образца материала | 4 мне. |
Когда связующее затвердеет | 1мне |
Output mode |
Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
испытательная нагрузка | Eight sets of weights |
Мощность | AC220V±10% 50/60HZ |